Garmin GPSMAP 8X10, Руководство пользователя

Страница: 32 / 110

Yellow From 3 to 4.5 m (from 10 to 15 ft.)
Green From 4.5 to 7.6 m (from 15 to 25 ft.)
To turn on and adjust, from a chart, select Options >
Layers > Water > Depth Shading .
Weather Layer Settings
From the Navigation or Fishing chart, select Options >
Layers > Chart > Weather > .
From a weather chart, select Options > Layers > Chart >
Weather .
Observed Layers : Sets which observed weather items
are shown. Observed weather is the present weather
condition that are visible now.
Forecast Layers : Sets which forecasted weather items
are shown.
Layer Mode : Shows forecasted or observed weather
information.
Loop : Shows a loop of forecasted or observed weather
information.
Legend : Shows the weather legend, with the severity of
the conditions increasing from left to right.
Weather Subscription : Shows weather subscription
information.
Restore Defaults : Resets the weather settings to factory
default values.
Edit Overlays : Adjusts the data shown on the screen
( Customizing the Data Overlays , page 6 ).
Radar Overlay Settings
From the Navigation or Fishing chart, select Options >
Layers > Radar > .
From a radar screen, select Options .
Radar To Standby : Stops radar transmission.
Gain : Adjusts the gain ( Adjusting Gain on the Radar
Screen Automatically , page 53 ).
Sea Clutter : Adjusts the sea clutter ( Adjusting Gain on the
Radar Screen Automatically , page 53 ).
Radar Options : Opens the radar options menu ( Radar
Options Menu , page 54 ).
Other Vessels : Sets how other vessels are displayed on
the radar view ( Other Vessels Layer Settings , page 21 ).
Radar Setup : Opens the radar display settings ( Radar
Setup Menu , page 55 ).
Edit Overlays : Adjusts the data shown on the screen
( Customizing the Data Overlays , page 6 ).
Chart Settings
NOTE:
Not all settings apply to all charts and 3D chart
views. Some settings require external accessories or
applicable premium charts.
From a chart, select
Options > Settings .
Map Orientation : Sets the perspective of the map.
Look Ahead : Shifts your present location toward the
bottom of the screen automatically as your speed
increases. Enter your top speed for the best results.
Vessel Orientation : Sets the alignment of the vessel icon
on the map. The Auto option aligns the vessel icon
using GPS COG at high speeds and the magnetic
heading at low speeds to better align the vessel icon
with the active track line. The Heading option aligns
the vessel icon with the magnetic heading. The GPS
Heading (COG) option aligns the vessel icon using
GPS COG. If the selected data source is not available,
the available data source is used instead.
WARNING
The vessel orientation setting is for informational
purposes and is not intended to be precisely followed.
Always defer to the navaids and conditions on the
water to avoid groundings or hazards that could result
in vessel damage, personal injury, or death.
Detail : Adjusts the amount of detail shown on the map, at
different zoom levels.
Chart Size : Sets the visible size of the chart.
World Map : Uses either a basic world map or a shaded
relief map on the chart. These differences are visible
only when zoomed out too far to see the detailed
charts.
Inset Map : Shows a small map centered on your present
location.
Fish Eye 3D Settings
NOTE:
This feature is available with premium charts, in
some areas.
From the Fish Eye 3D chart view, select Options.
View : Sets the perspective of the 3D chart view.
Tracks : Shows tracks.
Sonar Cone : Shows a cone that indicates the area
covered by the transducer.
Fish Symbols : Shows suspended targets.
Supported Maps
To help you have a safe and enjoyable time on the water,
Garmin devices only support official maps produced by
Garmin or an approved third party producer.
You can purchase maps from Garmin. If you purchase
maps from a seller other than Garmin, investigate the
seller before purchasing. Be extra cautious with online
sellers. If you have purchased an unsupported map, return
it to the seller.
Garmin Quickdraw Contours Mapping
WARNING
The Garmin Quickdraw Contours mapping feature
allows users to generate maps. Garmin makes
no representations about the accuracy, reliability,
completeness or timeliness of the maps generated by third
22 Garmin Quickdraw Contours Mapping