71
Messages
Appendix C
The GPS V uses an on-screen message system to alert
you to unit operating characteristics. Press the
ENTER
key to acknowledge the message and return to the page
you were viewing.
Anchor Drag
- You have drifted beyond the specifi ed
anchor drag alarm distance.
Arriving at Destination
- You have arrived at the
destination location.
Can’t Unlock Maps
- At least one map on the data
card is locked.
Data Transfer Complete
- Transfer of data to the
unit from PC software has been completed.
Database Error
- A waypoint or route failed to store
in memory. If the problem persists, return the unit to
GARMIN for service.
Detail Maps Don’t Support Routing
- The
MapSource maps that have been downloaded and saved
into the GPS V’s memory do NOT support automatic
routing.
GPS Turned Off for Indoor Use
- GPS satellite
reception has been disabled for indoor use.
Low Battery
- The batteries are low and should be
replaced.
Memory is Full
- The unit’s memory is full. To
reduce the amount of memory used, delete unused routes,
waypoints, or track log data.
Near Proximity Point
- You have entered the alarm
radius for the proximity waypoint indicated.
No Diff GPS Location
- No differential correction
data is available or not enough data is available to com-
pute a DGPS position.
None Found
- A search through MapSource data,
using the selected criteria, has produced no matching
results.
Note Memory is Full
- Calendar note memory is
full. No additional calendar notes can be stored without
deleting old notes to create memory space.
Off Route
- You have ventured off the current route.
Off Route Recalculating
- You have ventured off the
current route and the GPS V is calculating a new route.
Poor Coverage
- The GPS V cannot acquire the neces-
sary number of satellites to compute your location.
GPS V OM.indd
10/3/01, 1:54 PM
71
