48
Reference
Marking Your Location as a Waypoint
The GPS V allows you to capture your current location and save it as a “waypoint”.
Use this feature to mark locations you may wish to return to in the future (e.g., parked
car location, trailhead or fi shing spot). The GPS V can hold up to 500 Waypoints.
To mark your location as a Waypoint:
1. Press and hold
ENTER
. The ‘Mark Waypoint’ page appears, with a default three-
digit name for the new waypoint at the top portion of the page. The GPS V captures
the location from the instant at which you pressed
ENTER
, so you do not need to
be concerned about moving, losing satellite reception or any delay while you change
the name or waypoint symbol.
2. You may wish to rename the waypoint or change the symbol, as described below.
Once you’ve made these changes, select the ‘OK’ button to permanently save the
new waypoint in memory.
To rename the Waypoint:
1. Use the
ROCKER KEYPAD
to select the name fi eld (top line) and press
ENTER
.
2. Use the
ROCKER KEYPAD
and
ENTER
to enter the new waypoint name, then
select ‘OK’ and press
ENTER
to save the new name.
Each waypoint may also be assigned a custom waypoint symbol for easy recognition
on the Map Page.
To change the Waypoint symbol:
1. Highlight the Personal Waypoint symbol (immediately to the left of the waypoint
name) and press
ENTER
. Use the
ROCKER KEYPAD
to select the desired symbol.
2. Press
ENTER
when you fi nd the most appropriate symbol. The new waypoint is
now stored in memory.
Waypoints
To mark your current location as a waypoint,
press and hold the
ENTER
key. The Mark
Waypoint Page will appear with your current
position and a pre-assigned waypoint name.
To change the waypoint name, use the
ROCKER KEYPAD
and
ENTER
to enter a
new name. You can also change the waypoint
symbol.
GPS V OM.indd
10/3/01, 1:53 PM
48
