Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 52 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 28
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Creating user waypoints from map pages:
1)
Push the Joystick to activate the panning function and pan to the map location of the
desired user waypoint.
2) Press the ENT Key. The ‘WPT - User WPT Information’ Page is displayed with the capture
d position.
3) Enter a user waypoint name (up to six characters).
4)
Press the
ENT
Key to accept the selected name.
5) If desired, define the type and location of the waypoint in one of the following ways:
Select “RAD/RAD” using the small FMS Knob, press the ENT Key, and enter the two
reference waypoint identifiers and radials into the ‘Reference Waypoints’ Window
using the
FMS Knobs.
or :
Select “RAD/DIS” using the small
FMS
Knob, press the
ENT
Key, and enter the
reference waypoint identifier, the radial, and the distance into the ‘Reference
Waypoints’ Window using the
FMS Knobs.
or
:
Select “LAT/LON” using the small
FMS
Knob, press the
ENT
Key, and enter the
latitude and longitude into the ‘Information’ Window using the
FMS
Knobs.
6) Press the ENT Key to accept the new waypoint.
7) If desired, change the storage method of the waypoint to temporary or normal by moving
the cursor to “Temporary” and pressing the
ENT Key to check or uncheck the box.
8)
Press the
FMS
Knob to remove the flashing cursor.
9)
Press the
Go Back
Softkey to return to the map page.
Editing User Waypoints
Editing a user waypoint comment or location:
1)
With the ‘WPT - User WPT Information’ Page displayed, press the FMS Knob to activate
the cursor. The cursor is placed in the ‘User Waypoint’ Box.
2) Use the FMS Knobs to enter the name of the User Waypoint; or turn the large FMS Knob
and scroll to the desired waypoint in the ‘User Waypoint List’ Box.
3)
Turn the large
FMS
Knob to move the cursor to the desired field.
4)
Use the
FMS
Knobs to make any changes.
5) Press the ENT Key to accept the changes.
6) Press the FMS Knob to remove the flashing cursor.
Changing the user waypoint storage duration default setting:
1)
With the ‘WPT - User WPT Information’ Page displayed, press the MENU Key.
2)
Move the cursor to select ‘Waypoint Setup’, and press the
ENT
Key.