Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 66 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 42
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
7)
Use the
FMS
Knobs to edit the Expect Further Clearance Time (EFC TIME), and press the
ENT
Key.
8) Press the ENT Key while ‘Activate?’ is highlighted to activate the direct-to with the
user-defined hold defined at the direct-to waypoint. (If the direct-to waypoint is part
of the active flight plan, the HOLD is inserted into the active flight plan. If the direct-to
waypoint is not part of the active flight plan, an off-route direct-to hold is created.)
Exiting a user-defined hold inserted into the active flight plan:
Press the
SUSP
Softkey. The system will provide guidance to follow the holding pattern
to the inbound course and resume automatic waypoint sequencing.
Removing a user-defined hold inserted into the active flight plan:
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the Active ‘Flight
Plan’ Window (PFD).
2)
Press the
FMS
Knob to activate the cursor (not required on the PFD) and turn the large
FMS Knob to highlight the HOLD waypoint.
3)
Press the
CLR
Key. A ‘Remove Holding Pattern?’ confirmation window is displayed.
4) Select ‘OK’ and press the ENT Key. The holding pattern is removed from the active flight
plan. Select ‘Cancel’ and press the
ENT
Key to cancel the removal of the holding pattern.
Removing a user-defined hold at an off-route direct-to:
1)
Press a
direct To
Key to display the ‘Direct To’ Window (PFD or MFD).
2) Press the MENU Key to display the ‘Page Menu’ Window with the cursor on the ‘Cancel
Direct-To NAV’ selection.
3) Press the ENT Key. The holding pattern is removed.
MaNaGING FLIGHT PLaNS
Importing and Exporting Flight Plans
Ignoring a flight plan transfer from a wireless connection:
1)
When a flight plan transfer has been initiated from a mobile device, a Pending Flight Plan
pop-up alert appears in the lower right corner of the MFD, and an Connext annunciation
appears to the right of the MFD page name.
2) Press the CLR Key to remove the pop-up alert and ignore the pending flight plan. The
pending flight plan will still be available on the ‘FPL - Flight Plan Catalog’ Page.
or :
Press the
Ignore
Softkey to remove the pop-up alert and ignore the pending flight plan.
The pending flight plan will still be available on the ‘FPL - Flight Plan Catalog’ Page.