Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 114 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 90
Hazard avoidance
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Vertically scanning a storm cell:
1)
While in the Horizontal Scan view, select the BRG Softkey. This places the cursor in the
Bearing field and displays the Bearing Line.
If
the Bearing Line is not displayed, press the MENU Key and turn the large FMS Knob to
select Show Bearing Line. Press the ENT Key.
2) Press the ENT Key.
3) Turn the small
FMS
Knob to place the Bearing Line on the desired storm cell or other
area to be vertically scanned.
4)
Select the Vertical Softkey. A vertical scan of the selected area is now displayed (Figure
6-69).
5)
The small FMS Knob may be used to move the scanned bearing line a few degrees right
or left.
6)
Turn the Joystick to adjust the range.
7) Press the FMS Knob to remove the cursor.
8) To select a new area to be vertically scanned, select the
Horizon
Softkey to return to the
Horizontal Scan view and repeat the previous steps.
adjusting antenna Tilt angle
adjusting antenna tilt on the Horizontal Scan display:
1)
Press the FMS Knob to activate the cursor in the Tilt field.
2) Turn the small FMS Knob to select the desired antenna tilt angle.
3) Press the
ENT
Key.
4)
Press the FMS Knob to remove the cursor.
adjusting antenna tilt on the Vertical Scan display:
1)
Select the Tilt Softkey to activate the cursor in the TILT field and display the Tilt Line.
If
the Tilt Line is not displayed, press the MENU Key and turn the large FMS Knob to select
Show Tilt Line. Press the ENT Key.
2)
Turn the small FMS Knob to adjust the antenna tilt angle. The selected tilt angle is
implemented when Horizontal Scan is again selected.
altitude Compensated Tilt (aCT) angle adjustment
Enabling/disabling altitude Compensated Tilt (aCT):
1)
On the 'Map - Weather Radar' Page, select the Features Softkey.
2) Select the
aCT
Softkey. When ACT is enabled, ‘Altitude Comp Tilt On’ is annunciated in
upper right corner of the Weather Radar Page.
or
: