Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 63 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 39
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
FLIGHT PLaN oPERaTIoNS
activating a Flight Plan Leg
activating a flight plan leg:
1)
Press the FPL Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the ‘Flight Plan’
Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large
FMS Knob to highlight the destination waypoint for the desired leg.
3) Press the aCT Leg Softkey (MFD only); or press the MENU Key, highlight ‘Activate Leg’,
and press the ENT Key. A confirmation window is displayed with ‘Activate’ highlighted.
4) Press the ENT Key to activate the flight plan leg. To cancel, press the CLR Key, or
highlight ‘Cancel’ and press the ENT Key.
5)
Press the
FMS
Knob to remove the flashing cursor.
along Track offsets
Entering an along track offset distance:
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the ‘Flight Plan’
Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large
FMS Knob to highlight the waypoint for the along track offset.
3) Press the aTK oFS Softkey (MFD only); or press the MENU Key, highlight ‘Create ATK
Offset Waypoint’, and press the ENT Key.
4) Enter a positive or negative offset distance in the range of +/- 1 to 999 nm (limited by leg
distances).
5)
Press the
ENT
Key to create the offset waypoint.
6)
Press the
FMS
Knob to remove the flashing cursor.
Entering a VNV altitude and along-track offset for the waypoint:
1)
Press the
¯
Key to display the ‘Direct To’ Window.
2) Turn the large FMS Knob to place the cursor over the ‘VNV’ Box altitude field.
3) Enter the desired altitude using the FMS Knob.
4)
Press the
ENT
Key to accept the altitude constraint; if the selected waypoint is an airport,
an additional choice is displayed. If the waypoint is an airfield, turn the small
FMS
Knob
to choose ‘MSL’ or ‘AGL’, and press the ENT Key to accept the altitude.
5)
The cursor is now flashing in the ‘VNV’ Box offset distance field.
6) Enter the desired along-track distance before the waypoint.
7) Press the ENT Key. ‘Activate?’ is highlighted.
8)
Press the
ENT
Key to activate.