Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 203 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A
appendix
179
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
NoTE:
The database updates may now be continued from any MFD page, however,
the update windows shown in these instructions will not be shown on the ‘Aux - Data-
bases’ Page. Use the instructions for updating databases from the ‘Aux - Databases’
Page if desired.
10)
Press the Update Softkey when the database update window appears. (Pressing the
View Softkey will allow database updates to be viewed from the ‘Aux Databases’ Page,
however, the database update window will not appear on the ‘Aux Databases’ Page.
Pressing the
Ignore
Softkey will postpone the updates until further action is taken.)
11)
If using a device that has not been previously paired with the system, a password prompt
will appear on the mobile device. Enter the password shown in the ‘Password’ Field of
the ‘Aux - Connext Setup’ Page.
12)
The database update window will appear. Database update progress may be monitored
on the mobile device.
13)
When the transfer is complete, the database update window will appear.
14) Press the Close Softkey.
15) Remove and apply power to the system.
16)
Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup
screen.
17)
Turn the large FMS Knob and select ‘Aux’
.
18)
Turn the small FMS Knob and select ‘Databases’.
19) Verify that the standby databases transferred and are now in the ‘Active’ Column.
20) To manually activate any databases that did not transfer to the ‘Active’ Column:
a)
Press the FMS Knob. The first database title on the screen will be selected.
b)
Turn the small FMS Knob as necessary to select the database title.
c) Verify the correct database cycle information is shown for each database for each
display.
or:
Press the Menu Key and select ‘Swap Standby and Active’ using the small FMS Knob and
press the ENT Key. Press the ENT Key or the FMS Knob to exit.
d)
Remove and apply power to the system.
e) Press the ENT Key or the right-most softkey on MFD display to acknowledge the
startup screen.
f) Turn the large FMS Knob and select ‘Aux’
.
g) Turn the small
FMS
Knob and select ‘Databases’.
h)
Verify that the standby databases transferred and are now in the ‘Active’ Column.