Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 201 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A
appendix
177
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
11)
Press the ENT Key or the right-most softkey on MFD display to acknowledge the startup
screen.
12)
Turn the large FMS Knob and select ‘Aux’
.
13) Turn the small FMS Knob and select ‘Databases’.
14) Verify that the standby databases transferred and are now in the ‘Active’ Column.
15) To manually activate any databases that did not transfer to the ‘Active’ Column:
a)
Press the FMS Knob. The first database title on the screen will be selected.
b) Turn the small FMS Knob as necessary to select the database title.
c) Press the
ENT
Key. A cyan double-sided arrow will appear indicating that the standby
database will become active.
or :
Press the Menu Key and select ‘Swap Standby and Active’ using the small FMS Knob and
press the ENT Key. Press the ENT Key or the FMS Knob to exit.
d) Remove and apply power to the system.
e) Press the ENT Key or the right-most softkey on MFD display to acknowledge the
startup screen.
f) Turn the large FMS Knob and select ‘Aux’
.
g) Turn the small
FMS
Knob and select ‘Databases’.
h)
Verify that the standby databases transferred and are now in the ‘Active’ Column.
16) For additional information on each database, press and then turn the
FMS
Knob to select
the database, and then press the details Softkey. Press the ENT Key or the FMS Knob to
exit.
or
:
Press the Menu Key and select ‘Details’ using the small FMS Knob and press the ENT Key.
Press the ENT Key or the FMS Knob to exit.
17)
To view database information for an individual display:
a) Turn the large FMS Knob and select ‘Aux’.
b) Turn the small
FMS
Knob and select ‘System Status’.
c)
Press the Display Database Selection Softkey (MFD1 DB, PFD1 DB) to show database
information for each display. Use the small
FMS Knob to scroll through the database
information. Press the
ENT
Key or the
FMS
Knob to exit.
UPdaTE daTaBaSES USING THE WIRELESS TRaNSCEIVER
In order to load databases through Garmin Pilot and the wireless transceiver, the wireless
transceiver must be enabled on the system and inserted in the bottom SD slot of the MFD. A
mobile device with Garmin Pilot must be paired with the wireless transceiver over Bluetooth