Garland XPE12 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 107

background image

70

Document: GAR_SM_4601777 (4/16)

Controls

Section 6

5. Scroll through Settings

to Software Update.
Press START UPDATE.

6. Press START UPDATE.

If search for USB unsuccessful – screen will state “Couldn’t find USB drive”. Try a different USB flashdrive and repeat number 5.
If USB was found successfully, start again from number 5.

7. The upgrade may take up to 10 minutes. Be patient and DO NOT remove the flashdrive.

The screen will turn black with white text. The text will change as the files are copied from the FlashDrive. The screen
may appear frozen as the first couple of files take a few minutes. Soon, the screen will advance as more files are loaded.
After the last file is processed, the screen will say ‘rebooting’ and automatically proceed to turn off and restart.

It may

reboot twice

as the software may need to update of the SIB (Smart Interface Board) as well. This is normal.

During the restart, check that the software version is the expected revision. The software version can also be verified in
Diagnostics.

8. Only remove the FlashDrive when the Home screen comes up. This is your indication that the software update is

complete.

9. Press Settings, select “SUPER USER” and enter the password provided. Scroll through Settings to Calibration. (Refer to

#4) Wait for the platen to move down and settle at the home switch. Verify that the “Current Platen Position” is the same
as the one recorded before the update. If the number is not /- 2, a gap calibration will be required. Return to
Settings.

10. From Settings scroll to Volume and confirm it is set to HIGH. Use the Up arrow key to confirm that the speaker is

working. Return to Settings.

11. From Settings scroll to Sleep Settings and confirm the Auto Sleep? is YES. Set the Auto Sleep Delay to 300 sec. Select

the check mark icon to save the changes.

12. The software update and menu check is completed here. The platen will stay close.

«
...
68
69
70
71
72
...
»

Содержание XPE12












































































































Отзывы:

Нет отзывов

Похожие инструкции для XPE12

Бренд: Neilsen Страницы: 12

Бренд: Tanaka Страницы: 15

Бренд: Princess Страницы: 60

Бренд: Stanley Страницы: 64

ORIGINAL KETTLE

Бренд: Weber Страницы: 16

Бренд: Spitznas Страницы: 32

Бренд: Backyard Pro Страницы: 30

Бренд: Argos Страницы: 11

Бренд: Jamestown Страницы: 116

Бренд: Charmate Страницы: 12

Бренд: Bosch Страницы: 141

11 DE Professional

Бренд: Bosch Страницы: 8

1030VSR - 3/8" High Speed Heavy Duty

Бренд: Bosch Страницы: 3

1033VSR - 1/2" 0-850 RPM Heavy Duty Drill

Бренд: Bosch Страницы: 3

Бренд: Bosch Страницы: 28

Бренд: Bosch Страницы: 93

Бренд: Bosch Страницы: 48

11316EVS - SDS Max Demolition Hammer 14A Motor

Бренд: Bosch Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды