GARDINER TECHNOLOGY Gardtec 800, Руководство по установке

Страница: 24 / 43

Page
45
Page
44
Expander Card 8 (Jumper in position 8 840 only)
4 Wire Mode 2 Wire Mode 2 Wire EOL Mode
AZE1 Zone 91 Zone 91 Zone 91
AZE2 Zone 92 Zone 92 Zone 92
AZE3 Zone 93 Zone 93 Zone 93
AZE4 Zone 94 Zone 94 Zone 94
TZE1 Tamper Zone 91 Zone 95 Zone 95
TZE2 Tamper Zone 92 Zone 96 Zone 96
TZE3 Tamper Zone 93 Zone 97 Zone 97
TZE4 Tamper Zone 94 Zone 98 Zone 98
Note: All AZE zones are +ve and all TZE zones are -ve.
Note: Wiring configurations may differ on each zone expander card to suit your
requirements. For example the control panel may be programmed as 4 Wire,
Expander 1 as 2 Wire and Expander 3 as 2 Wire EOL etc.
GARDTEC
800 Series
Wiring Connections
Expander Card 5 (Jumper in position 5 840 only)
4 Wire Mode 2 Wire Mode 2 Wire EOL Mode
AZE1 Zone 61 Zone 61 Zone 61
AZE2 Zone 62 Zone 62 Zone 62
AZE3 Zone 63 Zone 63 Zone 63
AZE4 Zone 64 Zone 64 Zone 64
TZE1 Tamper Zone 61 Zone 65 Zone 65
TZE2 Tamper Zone 62 Zone 66 Zone 66
TZE3 Tamper Zone 63 Zone 67 Zone 67
TZE4 Tamper Zone 64 Zone 68 Zone 68
Note: All AZE zones are +ve and all TZE zones are -ve.
Expander Card 6 (Jumper in position 6 840 only)
4 Wire Mode 2 Wire Mode 2 Wire EOL Mode
AZE1 Zone 71 Zone 71 Zone 71
AZE2 Zone 72 Zone 72 Zone 72
AZE3 Zone 73 Zone 73 Zone 73
AZE4 Zone 74 Zone 74 Zone 74
TZE1 Tamper Zone 71 Zone 75 Zone 75
TZE2 Tamper Zone 72 Zone 76 Zone 76
TZE3 Tamper Zone 73 Zone 77 Zone 77
TZE4 Tamper Zone 74 Zone 78 Zone 78
Note: All AZE zones are +ve and all TZE zones are -ve.
Expander Card 7 (Jumper in position 7 840 only)
4 Wire Mode 2 Wire Mode 2 Wire EOL Mode
AZE1 Zone 81 Zone 81 Zone 81
AZE2 Zone 82 Zone 82 Zone 82
AZE3 Zone 83 Zone 83 Zone 83
AZE4 Zone 84 Zone 84 Zone 84
TZE1 Tamper Zone 81 Zone 85 Zone 85
TZE2 Tamper Zone 82 Zone 86 Zone 86
TZE3 Tamper Zone 83 Zone 87 Zone 87
TZE4 Tamper Zone 84 Zone 88 Zone 88
Note: All AZE zones are +ve and all TZE zones are -ve.
GARDTEC 800 Series Wiring Connections
4344R12.qxd 03/09/99 11:09 Page 44