Gardenline GLPC 41, Общее руководство пользователя

Страница: 64 / 72

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
68
41cc Petrol Chainsaw – GLPC 41 Maintenance and servicing
CAUTION!
Never put the equipment into storage for longer than 30 days
without carrying out the following steps.
Storing the equipment
If you intend to store the equipment for longer than 30 days, it must be prepared
accordingly. Otherwise the fuel still remaining in the carburettor will evaporate
and leave a rubbery sediment. This can cause problems when starting up the equipment
and may require expensive repairs.
1. Slowly remove the fuel tank cap to release any pressure
that may have formed in the tank. Carefully empty the
tank of fuel.
2. To remove the fuel from the carburettor, start the engine
and let it run until the equipment stops.
3. Leave the engine to cool (approx. 5 minutes).
4. Remove the spark plug (see 'Spark plug (Fig. 24b)' on
page 60). You will need the supplied combined
spark plug wrench/screwdriver and a torque wrench.
5. Add one teaspoon of 2-stroke engine oil into the
combustion chamber (See Fig. 32).
6. Slowly pull the starter cord several times to apply a layer
of oil to all internal parts. Refit the spark plug.
Putting the equipment back into operation
1. Remove the spark plug (see 'Spark plug (Fig. 24b)' on page 60).
2. Quickly tug on the starter line to remove excess oil from the combustion chamber.
3. Clean the spark plug and check that the electrode gap is correct, or insert a new
spark plug with the correct electrode gap.
4. Prepare the equipment for operation.
5. Fill the fuel tank with the relevant mixture of fuel and oil. See the section 'Fuel and oil'
on page 39.
6. Top up the chain oil in the chain oil tank.
Fig. 32