manualshive.com logo in svg

Gardenline GLPC 41, Общее руководство пользователя, Страница: 34 / 72

Поделиться
Скачать
Gardenline GLPC 41 Скачать руководство пользователя страница 34

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

 

 

  www.einhell.co.uk

38

41cc Petrol Chainsaw – GLPC 41 

Set up

 

WARNING!

The brake lever should snap into both positions. If strong 

resistance is felt,or the lever does not move into either 

position, do not use your saw. Take it immediately to a 

professional Service Centre for repair.

5. Fuel and oil – Recommended fuels

 Use only a mixture of unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture 

as indicated in the fuel mixing table.

 

CAUTION!

 

Do not use a fuel mixture which has been stored for longer 

than 90 days.

 

CAUTION!

 Never use 2-stroke oil with a recommended mixing ratio of 

100:1. The manufacturer’s warranty will be voided in case of 

engine damage due to inadequate lubrication.

 

CAUTION!

 Only use containers designed and approved for the purpose 

to transport and store fuel. Pour the correct quantities of 

petrol and 2-stroke oil into the mixing bottle provided 

(see scale printed on the bottle). Then shake the bottle well.

Содержание GLPC 41









































































Отзывы:

Нет отзывов