background image

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

  www.einhell.co.uk

19

 

 

41cc Petrol Chainsaw – GLPC 41

Safety

only one hand. Always use both hands on the equipment 

and wrap your fingers and thumbs around the handles. 

injury Hazard.

f)  

Always keep the chain on the ground whilst the 

equipment is in operation.

g)  

Chainsaw servicing, other than the items listed in the 

user manual safety and maintenance instructions, 

should be performed only by competent chainsaw 

service personnel. Risk of injury/death.

h)  

Do not use the equipment over an extended period 

of time – take regular breaks. Tiredness whilst using 

a machine could result in damage to the machine, or 

personal injury.

i)  

Do not use the equipment when tired or under the 

influence of alcohol or drugs. Being tired or under the 

influence of drugs or alcohol whilst using a machine could 

result in damage to the machine, or personal injury.

National regulations differ in some countries and may restrict the 

use of the machine.

J)  

Any modifications to the product may place your 

personal safety at risk and cause the manufacturer’s 

warranty to be voided. 

K)  

Never use the equipment near inflammable liquids or 

gases, neither in enclosed rooms nor outdoors. This 

may cause explosions and/or fire. Fire/explosion risk.

Содержание GLPC 41









































































Отзывы: