AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
44
41cc Petrol Chainsaw – GLPC 41
Use
As a result of this friction, the starter line will become frayed
and will wear away faster. Always hold the starter cable when
the starter line retracts.
Starting the engine when warm
(The equipment has been idle for less than 15-20min)
Fill up the fuel tank with the relevant mixture of petrol and oil (Fig.11a/pos. 14), and also
top up the chain oil (Fig.11a/pos. 12). See the section 'Fuel and oil' on page 38.
Be certain the chain brake is disengaged before starting the unit (Fig. 11b/pos 5).
1. Make sure the stop switch is in the 'I' (ON) position (Fig.11b/pos.10).
2. Set the equipment down on a firm level flat surface. Hold the saw firmly as shown.
(Fig. 12d) Beware of moving chain!
3. Pull the starter rapidly 6 times (Fig. 11b/pos.7 & Fig. 12d). The engine should start. If the
equipment does not start after 6 tugs, repeat steps 1-6 of the procedure for starting
the engine from cold (See page 41).
Fig. 12d
Fig. 11b
5
10
7
Each time before use, check the following:
– That there are no leaks in the fuel system.
Содержание GLPC 41
Страница 72: ......
