Gardenline GLPC 41 Скачать руководство пользователя

Страница: 21 / 72

AFTER SALES SUPPORT

0151 649 1500

1890 946244

www.einhell.co.uk

41cc Petrol Chainsaw – GLPC 41

Safety

– Safety devices on the machine may not be removed or

dismantled.

– Check to make sure that moving parts are functional, that

they are not jammed and that the parts are not damaged.

All parts must be properly fitted to guarantee the safety of

the device.

– Damaged protective devices and parts must be

professionally repaired or replaced by a customer service

workshop.

– You must replace a worn or damaged chain or chain bar.

Pull off the spark plug boot and remove the spark plug

before doing so.

– Damaged switches must be replaced by a customer service

workshop. Do not use the chainsaw if the power switch

cannot be turned on and off.

– Defects in the machine, including defects affecting

protective devices and the chain and chain bar, must be

reported to the person responsible for safety as soon

as they are identified.

– For your own safety, only use accessories and auxiliary

equipment specified in the instruction manual or

recommended or specified by the tool manufacturer.

Using tools or accessories other than those recommended

in the instruction manual or catalogue may put you at risk

of personal injury.

– The following factors may influence the effect of noise on

the operator:

– Over-extended use for long periods of time. Take regular

breaks with the machine switched off.

Содержание GLPC 41









































































Результаты поиска

Содержание GLPC 41

Отзывы:

Похожие инструкции для GLPC 41

Бренды по названию

Популярные бренды

Gardenline GLPC 41, Общее руководство пользователя

Результаты поиска

Содержание GLPC 41

Отзывы:

Похожие инструкции для GLPC 41

Бренды по названию

Популярные бренды