AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
32
41cc Petrol Chainsaw – GLPC 41
Safety
– Wear a dust mask in dry conditions to prevent dust
inhalation every time you perform any work.
– Before start-up, the protective guard must be correctly
fitted and the chainsaw should never be operated without
the protective guard.
– Always position yourself in a stable upright position when
working with a chainsaw.
– Guide the chainsaw properly.
– Never stress the chainsaw so that it comes to a stop.
Make sure that any sawdust and wood debris are not
caught around the outside of the chain and chain bar
or underneath the chain brake lever and clutch area
(See Fig. 20d & Fig. 20e on Page 51).
– Never remove debris from the machine, while the engine
is running.
– To remove debris from the chain and chain bar, switch the
machine off and pull off the spark plug boot and remove
the spark plug.
– Do not in any case push against the side of the chain and
chain bar to stop it after switching off the engine.
– Observe the notes for lubricating the machine,
and changing/replacing chains and chain bars.
– All protective and safety devices must be immediately
remounted once repairs or maintenance are complete.
9. Residual risks
Despite being used properly, certain residual risk factors
cannot be completely ruled out. The following risks associated
with the design and construction of the machine may apply:
– Contact with exposed saw teeth of the saw chain
(cutting hazards).
Содержание GLPC 41
Страница 72: ......
