AFTER SALES SUPPORT
21
1300 855 831
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
MODEL: Garden 5 in 1 Petrol Tool PRODUCT CODE: 58903 03/2019
AUS
General Safety Warnings
à
Always switch off the 5 in 1 Petrol Tool, before you put it down.
à
Keep in mind that there is risk of injuries in the area of the cutting device intended to
cut off the line.
à
CAUTION: The cutting tool continues rotating for a few seconds after the engine is
turned off.
à
Put the 5 in 1 Petrol Tool down only after the cutting tool has completely stopped and
the motor is turned off.
à
When the cutting tool is damaged, it must be replaced at once.
à
Always use the original line only. Never use a metal wire instead of the nylon line.
à
5 in 1 Petrol Tool and cutting tools must be properly inspected and serviced periodi-
cally. Damages must be repaired by a service center.
à
Only use accessories recommended by the manufacturer.
à
Have your 5 in 1 Petrol Tool serviced only by qualified personnel and by use of original
spare parts only. This ensures that the 5 in 1 Petrol Tool will work safely in the future.
Residual risks
• There will always be residual risks, even if you use this equipment according to in-
structions. The following hazards can occur in connection with the construction and
design of this 5 in 1 Petrol Tool.
• Health hazards resulting from swinging of hand and arm if the equipment is used for
an extended period and if it is not operated or maintained properly.
• Injuries and material damage caused by ejection of tool attachments which are un-
expectedly thrown from the equipment because of sudden damage, wear and tear
or improper attachment.
• Warning! This 5 in 1 Petrol Tool generates an electromagnetic field during operation.
Under certain circumstances, this field can affect active or passive medical implants.
In order to reduce the risk of severe or fatal injuries, we recommend that people with
medical implants consult their doctor and the manufacturer of the medical implant
before operating the 5 in 1 Petrol Tool.
• Use the gripping spikes for every cut as the starting point and always start the cut
with the saw chain running. Make the cut in such a way that the saw does not get
jammed in the wood.
• Pay particular attention to branches under tension.
• Always pull the 5 in 1 Petrol Tool out of the wood when the saw chain is running.
• Never work with the 5 in 1 Petrol Tool above shoulder height or with only one hand.
• Always stand away from the falling direction. Position yourself on a slope above the
tree to be felled.
• Always stand sideways when carrying out sawing work on a tree which is located on
a slope, never work from above or below.
• Always look out for the falling direction of the parts which are cut off.
• Never start the cut with the bar tip and never cut with the bar tip.
