36
AFTER SALES SUPPORT
1300 855 831
MODEL: Garden 5 in 1 Petrol Tool PRODUCT CODE: 58903 03/2019
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
AUS
Working instructions
Recoil
The recoil occurs when the chain on the top rail suddenly sticks because it is jammed or
encounters a foreign object in the wood. The saw can suddenly strike in the direction of
the operator. Rebounds happen often if the top rail is used for cutting.
Avoid recoil
Be aware of the forces and situations that can lead to jamming of the chain on top of rail.
Do not cut more than one branch at a time.
Do not tilt the rail to the side when pulling out of cutting gap - the chain could get caught.
Working with Edger Attachment
An arrow on the deflector shows the correct direction of rotation of the cutting blade.
The arrow on the deflector must always face away from you, so that cuttings and other
debris will be diverted away from the machine and your position.
Adjust carrying harness and grip to suit your size before starting work. The machine
should be properly balanced as specified in your instruction manual for proper control
and less fatigue in operation. To be better prepared in case of an emergency, practise
releasing the unit from the harness as quickly as possible.
A
E1
E2
E1
E2
2
B
3
Adjust the depth of cut
• Shut off the engine - Risk of accident!
• Loosen wingnut (E1) anti-clockwise
• Adjust wheel (E2): upwards
- depth of cut (A) increases
downwards - depth of cut (A) decreases
The depth of cut is influenced by uneven ground as well as height and working position
of the operator. For this reason,
• adjust the wheel (E2) so that the blade barely touches the ground when the machine
is held in a normal working posture or penetrates the ground at most to a depth (B) of
5 mm.
