GWF-7075 Manual —
LS10147-002GF-E:G 10/5/2022
61
System Options
Programming
6.6.1 Communication Options
Auto Test Time
To access the Auto Test Time screen:
1.
Login to the panel.
2.
Select 7 to access the Program Menu.
3.
Select 5 to access System Options.
4.
From the next Menu, select 1 to access Communication Options.
5.
Select 1 to access Auto Test Time.
6.
Enter the hour you want the control panel to send an Automatic Test Report (or press the up or down arrow key), then press ENTER.
7.
Enter the minutes (or press the up or down arrow key), then press ENTER.
8.
Select AM or PM by pressing the up or down arrow key, then press ENTER.
9.
To select the Report Time Interval, press the up or down arrow key. Then, press ENTER. Time Interval selections are the following:
• 24 hour
• 12 hour
• 6 hour
• 4 hour
Phone Lines
To access the Phone Lines screen:
1.
Login to the panel.
2.
Select 7 to access the Program Menu.
3.
From the Program Menu, select 5 to access System Options.
4.
Select 1 to access Communication Options.
5.
Select 2 to access the Phone Lines menu.
6.
Select the phone line to be edited (1 or 2) by pressing the up or down arrow, then press ENTER.
Dialing Prefix
Enter up to 9 characters to be used for such things as PBX dial-out codes, a pause, etc. The following special characters are available:
Use the number buttons on the annunciator or the up/down arrow keys to select special characters. Characters begin displaying after “9”.
Enter a dialing prefix (if needed), then press ENTER. Or, press the right arrow to bypass the dialing prefix option.
Number of Answer Rings
This option is used in conjunction with the HFSS Honeywell Fire Software Suite. Use the option to determine the number of rings before the
panel answers a call from the computer. The range is 00-15 rings. This option is factory-programmed as 06 rings, which should be compati-
ble for most installations, where the answering machine bypass feature is used. You may need to adjust it depending on the installation’s tele-
phone system.
The selections you enter must match the programming for this option in the Communication Configuration dialog box of the HFSS Honey-
well Fire Software Suite.
7.
Enter the desired number of answer rings, then press ENTER.
NOTE:
AM and PM are only available if the panel “Clock Options” are set to AMPM mode. Otherwise, the clock is set in the military time and
you cannot select AMPM.
#
Pound (or number) key on the telephone
*
Star key on the telephone
,
Comma (character for 2-second pause)
Line:1 N
P: Rings: 06
D:TT Options: UNYN
<Dialing Prefix>
dial tone detection disabled Y/N
number of rings before the panel
answer a call from a computer
dial options: touch-tone, pulse, both
phone line to edit
Enter a dialing prefix. Up to 9
characters can be used to allow
for things such as PBX dial-out
codes, a pause, etc.
phone line unused Y/N
answering machine bypass Y/N
monitor line Y/N
U for U.S. or E for European
U.S. format = 60/40msec make/break
European = 66/34msec make/break
Figure 6.8 Phone Lines Editing Screen
Содержание Honeywell GWF-7075
Страница 51: ...GWF 7075 Manual LS10147 002GF E G 10 5 2022 51 Notes...
Страница 98: ...Cut along dotted line...
