Gambro Cobe Spectra, Справочник по основам

Страница: 211 / 245

Data Input Limits
COBE
®
Spectra™ Apheresis System • Essentials Guide 14-3
Desired TPE/RBCX fluid balance (%) 100% 75% 150%
Volume of replacement fluid to be used for TPE (mL) (no default) 100 mL 9999 mL
Volume of plasma plus AC to remove for TPE (mL) (no default) 100 mL 9999 mL
RBCX replacement fluid Hct (%) 80% 0% 99%
RBCX end Hct (%) (no default) 10% 70%
Desired fraction of RBCs remaining (%) 40% 1% 100%
RBC replacement volume (mL) 0 mL 100 mL 9999 mL
Access pressure low limit (mm Hg) –250 mm Hg –50 mm Hg –250 mm Hg
Return pressure high limit (mm Hg) 400 mm Hg 50 mm Hg 400 mm Hg
BMP bag volume (mL) 0 279 mL 10,000 mL
BMP Hct (%) 0% 15% 70%
* An accurate donor Hct is critical for performing a leukoreduced platelet collection procedure. Obtaining an actual Hct from the donor on the day of donation and entering
that Hct during donor data entry is recommended.
+ The operator cannot enter an inlet pump flow rate below 10 mL/min, but under certain circumstances the Spectra system can set a lower rate.
Table 14-1: Donor/patient data entry limits (continued)
Parameter Initial Setting (Default) Minimum Limit Maximum Limit