Gambro Cobe Spectra, Справочник по основам

Страница: 61 / 245

Loading and Removing the Disposable Tubing Set and Other Common Operations
COBE
®
Spectra™ Apheresis System • Essentials Guide 4-5
4
Place the disposable tubing set package on the centrifuge cover.
Secure the package underneath the packaging hook on the front
panel (see Figure 4-2).
Figure 4-2: Disposable tubing set package secured under hook
5
Remove the inlet line coil and remove the paper tapes.
6
Hang the access connection on the hook on the left side of the IV
pole. (The three lines attached to this connection are taped
together.)
7
Place the access saline line over the top of the system.
8
Dual-Needle procedures:
a Remove the return line coil and remove the paper tapes.
b Hang the return connection on the hook on the left side of the
IV pole. (The two lines attached to this connection are taped
together.)
c Place the return saline line over the top of the system. Verify
that the needle connection is snug.
Single-Needle ELP, LRS, and LRST procedures: Remove the
Single-Needle bag and lay it over the top of the system.
9
Remove the bags and hang them in the correct position on the IV
pole:
• • • • •
AC Saline Waste Plasma Collection
(or plasma/) (or replacement
RBC waste) fluid)
Note: MNC and PMN procedures: You need a 600-mL
transfer bag to concurrently collect plasma unless you are
using a Functionally Closed WBC set.
Note: BMP procedures: ACD-A is not necessary to
perform this procedure. For more information about BMP
procedures, see Chapter 5 in the
Cell Therapy Guide .
Tip: Single-Needle procedures: The Return Flow
Controller occupies space on the IV pole, so some bags such
as the AC and saline bags must share the front and back of
the same hook.