2. Operating System and Equipment
86
Anti-Pinch Function (Apply to Certain Models)
The driver side electric window is equipped with
anti-pinch function. If the window encounters an
obstacle when it moves up in the anti-pinch area
(4~200mm), it stops there and moves down
immediately. If the above situation occurs, check
out the reason before closing the window again.
If the anti-pinch function has been activated for
quite a few times in a short period, the initialization
data of anti-pinch is automatically erased to
protect the window movement system. In this case,
check carefully for obstacle again. Remove the
obstacle if any. Perform the initialization learning
to recover the anti-pinch function.
Caution
•
In spite of the anti-pinch function, it is
necessary to check for obstacle before
closing windows. In some cases (for
example, thin or flexible obstacles),
anti-pinch function may not be
triggered.
•
Do not install any accessories within
window movement range. Otherwise
anti-pinch function could be affected or
accidentally triggered thus the
windows cannot be closed normally.
Anti-Pinch Initialization (Apply to Certain
Models)
Initialization must be performed again if the driver
side electric window cannot move up
automatically due to anti-pinch function failure, or
if initialization data of anti-pinch has been
automatically erased due to the anti-pinch function
being activated for quite a few times in a short
period.
When the button of the driver side electric window
is pulled up, the window moves up step by step.
Repeat the process several times until the window
reaches the highest position. Then continue to pull
up and hold the button for 2 to 3 seconds. The
initialization is thus completed.
Caution
During initialization learning, the window
has no anti-pinch function, so do not use
any part of the body or other articles to
obstruct the window movement, otherwise
injury may be caused and the initialization
affected.
If the electric window system fails, please
contact your GAC MOTOR dealer for
inspection.
