2. Operating System and Equipment
2.7.6 iPod
Play
This product has been certified by iPod. After iPod
or iPhone is connected to audio host through USB
harness, music in iPod or iPhone can be played.
If iPod or iPhone is not connected to audio host, it
will prompt that there is no iPod when clicking
“iPod” soft button.
System Setting
Open the general interface for host setting, and
select iPod for the item “phone priority connection”.
Phone priority connection
-
Phone priority connection can select that the
system gives priority to connect
iPod.
Hint
●
Refer to USB Play for procedure of iPod
playing.
●
In terms of USB harness connecting
iPod equipment to audio host, be sure
to use genuine harness; otherwise,
failure of normal play may be caused.
●
If iPod certification failure or failure of
normal reading takes place, it is
suggested to pull and plug USB
harness again that connects audio
host.
●
If it prompts that iPod is in stop state, it
is suggested to pull out iPod and
replug it after clicking “play music”.
180