3. Driving Guide
Hint
●
After the vehicle has been parked
steadily; you should first apply the EPB
and then put the shift lever to the “P”
gear.
●
The noise may be generated, which is a
normal phenomenon when applying
the EPB.
●
If the vehicle is used to tract other
vehicles or is parked a rampway with
larger slope, you can pull the EPB
system button once after the first
vehicle parking is completed, to ensure
the maximum parking force.
●
On the slope of 17 ~ 30 %, a clamping
will be performed again 5 minutes later
upon the first application of the EPB. A
certain noise is normal at this moment.
Caution
●
The parking brake must be applied
when parking.
●
When the vehicle is in driving process,
it is not allowable to decrease the
speed by using EPB when
unnecessary, because the parking
brake only exerts power on the rear
wheels, which can easily cause traffic
accidents.
Release Static Parking Brake
–
Depress the brake pedal when the start
switch is in “ON” position.
–
Press the EPB system key along the
direction of -arrow- to release the parking
brake until the indicator light
in the
instrument is off, showing that the parking
brake has been released.
218