4. Usage and Maintenance
-
Lift the wiper arm up, adjust the wiper blade
as shown in the figure and then press it down
to remove it.
-
Slowly lower the wiper arm.
-
Place a new wiper blade back to the wiper
arm in reverse steps, and install after hearing
a “click”.
-
Slowly lower the wiper arm back to the
windshield.
-
Switch the Start or Ignition switch to “ON”
gear, making the windshield wiper go back to
its original position.
Replacing Rear Windshield Wiper Blade
-
Hold the wiper arm (1), press the wiper blade
(2) hard in the direction of the arrow and
remove it.
-
Slowly lower the wiper arm.
-
Place a new wiper blade back to the wiper
arm in reverse steps, and install after hearing
a “click”.
-
Slowly lower the wiper arm back to the
windshield.
It is recommended to replace your wiper blade at
GAC MOTOR dealer when necessary.
Caution
●
When lifting the wiper arm, grasp the
wiper arm with hand, and do not grasp
the soft wiper blade.
●
Be sure to use new wiper blade with the
same length and specification.
●
Carefully lower the wiper arm to
prevent striking the windshield due to
instantaneous drop.
●
Check the condition of the wiper blades
regularly, and replace them as
required. Timely replace the damaged
wiper blade.
●
Seriously worn or dirty wiper blade is
very easy to scratch the windshield,
and will influence the forward visibility
and reduce the driving safety during
use.
272
