1. Safety Operating Instructions
21
1.2.3 Seat
Belt
Wear front seat belts
–
Adjust the front seat properly
(Please refer
to Page 114
)
.
–
Adjust the headrest properly
(Please refer to
Page 112)
.
–
Gradually draw the seat belt out at constant
speed, and draw it over your shoulder and
hip. Insert the latch plate into the
corresponding buckle until you hear a click.
–
Then, pull the shoulder part of the belt
upward parallel to your upper body. Strain
the hip part of the belt and make sure that the
latch plate is locked securely.
Wear rear seat belts
–
Adjust the headrest properly
(Please refer to
Page 112)
.
–
Gradually draw the seat belt out at constant
speed, and draw it over your shoulder and
hip. Insert the latch plate into the
corresponding buckle until you hear a click.
–
Then, pull the shoulder part of the belt
upward parallel to your upper body. Strain
the hip part of the belt and make sure that the
latch plate is locked securely.
Warning
•
Be sure you and your passengers wear
seat belts properly before driving.
•
Be sure to insert the latch plate into its
own buckle. Never insert it into other
buckles.
Caution
•
When pulling out your belt to insert it
into buckle, make sure it remains
parallel to your body. Make sure it is
not twisted.
•
Insert the latch plate into the buckle
and tug on the belt to make sure the
latch is securely locked.
•
Grasp the upper end of the belt and
quickly pull it out to check whether the
belt retractor can lock. Normally, the
retractor can lock quickly.
