3. Driving Guide
Hint
●
Only on the premise of safety of the
engine and transmission can the
transmission perform the upshift or
downshift operation. When using the
“M” mode to switch the transmission to
M1 - M3 gear, if the engine has reached
the maximum speed, which the
transmission can withstand, the
transmission will automatically raise a
gear; Also, in order to prevent too low
motor speed, the transmission will
automatically reduce a gear at a certain
speed.
●
The “M” mode is recommended when
driving on road conditions such as
mountain roads or hilly areas. Fix the
transmission to a certain gear to
prevent the transmission from
switching frequently.
●
Once the “M” mode is applied, the
transmission will always be in this
mode except for the engine flameout,
the shift lever is switched to the “S”
gear or the driving mode button exits.
Release the Shift Lever Locking
–
Apply the parking brake.
-
Make sure the start switch or ignition switch
is off.
–
Open the middle leather casing.
–
Press the switching unlock button - 1 -, press
the unlock button at the end of the handle of
the shift lever - 2 -, and then put the shift lever
from “P” to “N” gear.
–
Install the middle leather casing.
–
Depress the brake pedal and start the engine
to check if the shift lever is back to normal.
Caution
If the shift lever is locked and it cannot be
withdrawn from the “P” gear, this method
can be used to for withdrawal. However, if
this failure occurs, it is generally indicated
that the vehicle may have problems and
should be repaired as soon as possible.
214
