Futura MCB3, Инструкция по установке/Техническая информация

Страница: 40 / 60

M CB 3 Installation Manual Page 38
Technical Setup - Valve
5.5
RH/LH Balance Test
RH/LH Balance
<UP/DOWN> to Test
<Push> to Return
0
Valve Setup Menu
RH/LH Balance - Balance Right Hand / Left Hand Blade Speeds
Ideally, the right hand and left hand blade velocities
should be the same. The Right Hand / Left Hand
Balance Test and adjustment allow adjustment
to compensate for different velocities of the right
and left hand sides of the blade.
For Lift & Lift machines: Adjust RH/LH balance
until oscillation amplitude of the blade during the
test is nearly equal for right hand and left hand
sides.
The RH/LH balance may be limited by unmatched
valves or the mechanics of the machine.
For Lift & Tilt machines with the pivot point in the middle of the blade, adjust RH/LH
balance until oscillation amplitude of the left hand end of the blade during the test is
minimized.
For Lift & Tilt machines with pivot points not in the center of the blade, adjust the RH/LH
balance so that the lift and tilt velocities are about the same when in operating modes.
The Test is not required. Measure the tilt blade velocity at the end of the blade farthest
from the pivot point.
Clockwise adjustment of the right multi-switch (larger value) will increase the speed
of the right side.
Counterclockwise adjustment of the right multi-switch (smaller value) will decrease the
speed of the right side.