Futura MCB3, Инструкция по установке/Техническая информация

Страница: 34 / 60

M CB 3 Installation Manual Page 32
Valve Setup Menu
Aux Vlv Drives - Auxiliary Valve Driver Setup
Selections enable setting of valve drivers for
specific applications and types of valves.
Selections are:
OFF
SP (Switched Power)
LS (Load Sense)
LSA (Load Sense A)
SP supplies Machine Voltage anytime the control box is on.
NOTE: SP is required for PV valves.
LS supplies Machine Voltage when either side of the control box is in AUTO mode
and receiving laser strikes, or when raising or lowering.
LSA supplies Machine Voltage when either side of the control box is in AUTO mode
or when raising or lowering.
If auxiliary valve drivers are not used, turn to OFF to avoid unused live wires.
Technical Setup - Valve
5.5
Valve Setup Menu
Aux Vlv Drives
Spool Profile
(Next menu items change
per valve type selected)
EXP EXP
Valve Setup Menu
< Exit >
Aux Vlv Drives
Spool Profile
(Next menu items change
per valve type selected)
SP SP
PT Valve Selected
PT Period ms- Selects the update period for PT valves.
Adaptive optimizes the signal according to the
laser RPM.
Other values can be set from 100 to 250 in
increments of 10 ms.
Valve Setup Menu
< Exit >
Spool Profile
PT Period ms
Max % On
ADPT
ADPT
PC or PV Valve Selected
Spool Profile
Spool profile selections are exponential (EXP)
and linear (LIN).
Choose the same profile as the installed valve
spool.
PC valves usually have exponential (EXP)
spool profiles.