Futura MCB3, Инструкция по установке/Техническая информация

Страница: 32 / 60

M CB 3 Installation Manual Page 30
Technical Setup - System
System Setup Menu 5.4
System Setup Menu
Remote R/L
Remote Offset
Remote Match
< Exit >
On On
Remote A/M - Remote Switch Auto / Manual Enable
Selections are On and Off. On enables switching between Automatic and Manual
with the remote switch.
Off disables switching between Automatic and Manual.
Remote R/L - Remote Switch Raise / Lower Enable
Selections are On and Off.
On enables the Raise and Lower command with
the remote switch.
Off disables the Raise and Lower command.
Remote Offset - Remote Switch Elevation Offset Enable
Selections are On and Off.
On enables an elevation offset to be set at the remote switch by rotating the multi-
switch. If slope is applicable, a slope change can be made at the switch.
Off disables the offset command.
Remote Match - Remote Switch Grade Match Enable
Selections are On and Off.
On enables an off-center laser strike to be set to on-grade with the remote switch by
pressing in the multi-switch and holding for two seconds.
The on-grade position can be reset to the center of the receiver by pressing in the
multi-switch and holding for five seconds.
Off disables the match command.
Highlight Exit and press in the multi-switch to return to the Technical Setup Menu.