FUTABA FMT-03 Скачать руководство пользователя

Страница: 46 / 68

<Functions of System Menu>

● Select the function name

and return to the System

menu by pushing the RTN

button or pushing the

Home/Exit button.

Procedure for changing S.BUS/S.BUS2 servo

setting

1. Select [S.BUS Servo] of the System Menu.
2. Wire the servo as shown in the figure above.
3. Push [READ]. The ID and current setting of

that servo are displayed.

4. When multiple servos are connected change

[INH] at the right side of the ID number on the

screen to [ACT] and enter the ID of the servo

you want to set.

5. Set each item. (Please see the next page.)
6. Push [WRITE]. The settings are changed.

S.BUS SERVO

An S.BUS/S.BUS2 servo can memorize the

channel and various settings internally. Servo

setting changes can be performed on the FMT-03

screen by wiring the servo as shown in the figure.

● Call the following setting screen by pushing the

[S.BUS Servo] button in the System Menu.

●Servo ID number

Individual ID numbers are memorized for your

S.BUS servos in your FMT-03. When a servo is

used (as shown at the right), the servo ID number is

automatically read by the transmitter.

If you use multiple S.BUS servos and do not

want to change the settings on all that are mounted

in a fuselage, only the desired servo in the group

can be set by entering the ID of that specific servo.

* With S.BUS/S.BUS2 servos of use, there are a function which

can be used, and an impossible function and a display screen

changes.

(Only the function which can be used by a servo is displayed.)

* After reading completion, with connection of the above

figure, if a stick is moved, the test of operation of the servo

can be operated and carried out.

S.BUS/S.BUS2 servo

FMT-03

*It is not necessary to carry out multiple connection of the

battery like a T18MZ/T14SG.

(It will damage, if it connects.)

Scrolling

● Moving cursor

● Push the S1 button to

call next page.

*When you connect to a transmitter with many servos which

may consume extra current, please use "Another power

supply HUB". And ensure power is supplied to extra servos

with another power supply.

Содержание FMT-03





































































Результаты поиска

Содержание FMT-03

Отзывы:

Похожие инструкции для FMT-03

Бренды по названию

Популярные бренды

FUTABA FMT-03, Инструкция по эксплуатации

Результаты поиска

Содержание FMT-03

Отзывы:

Похожие инструкции для FMT-03

Бренды по названию

Популярные бренды