FUTABA FMT-03, Инструкция по эксплуатации

Страница: 30 / 68

30 <Basic Operation>
Home screen
Model Name
• The model name that
is currently used is
displayed here.
•The model select
screen can now be
opened directly from
the home screen.
Move the cursor to
the model name on
the home screen,
and push the RTN
button.
User's name
Use the edit dial to select the following display area to call each setting screen, and Push the RTN
button. The setting screen appears.
●RF Indicator
●Trim position Indicator
Battery Indicator
• When the battery voltage
reaches 6.2V, the alarm will
beep. Land your aircraft
immediately.
Home Screen
Condition Name
• The condition name
that is currently used
is displayed here.
Timer display screen
• When the cursor
is moved to the
clock icon " " of
the home screen,
the timer display
screen appears.
System mode
• System(FASSTest 18CH etc.)
mode is displayed here.
• Use the cursor to highlight this,
then push the RTN button to call
the frequency set-up screen.
Battery voltage for
receivers
• In flight receivers
battery, it is
displayed.
Timer
• Timer is displayed here.
Push the RTN button to start/stop the
timer. (When the RTN button is pushed
for 1 second, timer is reset to the initial
value.)
• Mode (UP/DN) is displayed here.
• Push the RTN button to call the timer
setting screen.
System timer
• This shows the accumulated time since
the latest reset. (Each model)
(Hour):(Minute):(Second)
(Menu)
• System
• Linkage
• Model
Push the RTN
button to call
each Menu
screen.