2.24.3 How to acquire and track targets
This equipment can manually or automatically acquire and track targets.
How to manually acquire targets
1.
Tap the target to acquire, and the cursor appears.
2.
Tap the [ACQUIRE] button displayed below the data box.
Note:
If any of the following conditions is not met, the manual acquisition is not
activated and error sound beeps.
The communication connection to the antenna unit is blocked.
The capacity for manual target acquisition is reached.
The [TT DISPLAY] menu is set to [Off].
The bearing signal becomes lost.
Out of acquisition range
Right after the acquisition, the acquisition symbol is shown as a dashed square. If the
target is consistently shown for about 1 minute, the acquisition symbol changes into a
solid-line circle. If tracking is successful after about 3 minutes, a vector indicating the
direction of movement appears. If acquisition fails, the acquisition symbol flashes.
Target numbers
Target numbers are assigned in ascending order. If a number is not used due to a loss
of targets, etc., and then a new target is acquired, an assignable number is searched in
order from the smallest number and an unused number is assigned.
Vector
Immediately after
acquisition
Tracking
Target number
2
.
RADAR
2-41
