⑤
When operating radar: TLL
•
Outputs TLL.
When operating fish finder:
Fixed mark, TLL
•
Displays fixed mark at selected location.
•
Outputs TLL.
⑥
When using radar:
[PICTURE CONTROL] menu
•
Opens/closes the [PICTURE CONTROL] menu.
•
Adjusts the gain, sea clutter reduction level and
rain clutter reduction level. Rejects interference
and noise.
•
The menu cycles through gain, sea clutter, rain
clutter, picture zoom, interference rejection and
noise rejection.
When using fish finder:
[POPUP] menu
•
Opens/closes the [POPUP] menu.
•
The menu cycles through [Auto Range]
→
[Range]
→
[Modes]
→
[Auto Gain Adjust]
→
[Offset HF]
→
[Offset LF]
→
[Gain Adjust HF]
→
[Gain Adjust LF]
→
When using multi beam
sonar:
[POPUP] menu
•
Opens/closes the [POPUP] menu.
•
Moves through [POPUP] menu. The selections of
[POPUP] menu differs after [Range Auto]
→
[Range]
→
[Mode] according to the selected
mode.
- Multi beam fish finder mode: Moves as [MB
Gain Auto]
→
[MB Gain Offset]
→
[MB Gain]
→
[MB Beam Angle]
→
[MB Beam Width]
→
- Side scan mode: Moves as [SS Gain Auto]
→
[SS Gain Offset]
→
[SS Gain]
→
- Cross section mode: Moves as [CS&3D Gain
Auto]
→
[CS&3D Gain Offset]
→
[CS&3D
Gain]
→
- 3D History mode: Moves as [CS&3D Gain
Auto]
→
[CS&3D Gain Offset]
→
[CS&3D
Gain]
→
[Pause]/[Resume]
→
⑦
[POWER/BRILLIANCE]
•
When the power is off.
-
Turns power on.
•
When the power is on.
-
Short press: Displays the [BRILLIANCE] menu.
-
Pressing and holding for two seconds: Displays
the power-off notification menu.
-
Pressing and holding for five seconds: Turns
the power off.
1
.
BASIC OPERATION
1-2
