Furuno FSV85MK2, Руководство пользователя

Страница: 175 / 199

9. MAINTENANCE
9-11
When multiple warnings occur at the same time, the warning with the highest priority
is displayed. The order of priority is as follows:
<<OVER TEMPERATURE!! >> RETRACT
TRANSDUCER AND TURN OFF POWER.
PRESS R/B KEY TO TURN OFF ALARM. This message blinks at the screen center and the
buzzer sounds when the temperature in the pow-
er supply block has exceeded 85°C;.

Press the R/B AUDIO key to silence the buzz-
er. Turn off the unit and have a qualified techni-
cian check the set.
<<TRANSDUCER IS A HALT CONDI-
TION!!>>TD IS A HALT CONDITION. CAN'T BE
OPERATED UNTIL IT CANCELS. CHECK
STOP BUTTON IS PUSHED OR TAKE OUT
HULL UNIT RATCHET." The hull unit is stopped because the emergency
stop button in the hull unit was operated or the
ratchet wrench in the hull unit was removed.

Press the R/B AUDIO key to silence the buzz-
er. Operate the emergency stop button and/or
restore the ratchet wrench to enable raising, low-
ering operations.
<<TD RECOVERED THE HALT CONDI-
TION!!>>TD RECOVERED THE HALT CONDI-
TION. PRESS

KEY, IF SAFETY IS
ENSURED. PRESS THE R/B KEY TO CLOSE
THE WINDOW.
The emergency stop condition at the hull unit
was released.

Silence the buzzer with the R/B AUDIO key.
<<TD WRONG POSITION ALARM!!>> TRANS-
DUCER IS KEPT AT WRONG POSITION. SET
BACK TRANSDUCER POSITION TO NORMAL
BY USING

KEY. PRESS R/B KEY TO TURN
OFF ALARM.
This message blinks at the screen center and the
buzzer sounds when the transducer is knocked
out of position.

Try to return the transducer to its normal posi-
tion by operating the

key and silence the buzz-
er with the R/B AUDIO key.
<<SHIP SPD ALARM!!>>TRANSDUCER IS
KEPT EXTENDED. MAX ALLOWABLE SPEED
FOR EXTENDED TRANSDUCER IS 18 KT.
PRESS R/B KEY TO TURN OFF ALARM. This message blinks at the screen center and the
buzzer sounds when the transducer is extended
and ship’s speed, input by external equipment,
exceeds 18 knots.

Silence the buzzer with the R/B AUDIO key
and lower ship’s speed.
<<SHIP SPD ALARM!!>> MAX ALLOWABLE
SPEED DURING RAISING/LOWERING
TRANSDUCER IS 15 KT. PRESS R/B KEY TO
TURN OFF ALARM. This message blinks at the screen center and the
buzzer sounds when the transducer is raised/
lowered and ship’s speed, input by external
equipment, exceeds 15 knots.

Silence the buzzer with the R/B AUDIO key
and lower ship’s speed.
Priority Message Remarks
1 <<TD IS A HALT CONDITION!!>> Remains on-screen until the cause is removed or
rectified.
2 <<TRANSDUCER NOT
RETRACTED!! >>* Remains on-screen until the cause is removed or
rectified. After the cause is removed or rectified
and restarts the unit, the message disappears.
3 <<OVERVOLTAGE!! >> Remains on-screen until the cause is removed or
rectified.
4 <<OVER TEMPERATURE!! (trans-
ceiver unit)>> Remains on-screen until the cause is removed or
rectified. After the cause is removed or rectified
and restarts the unit, the message disappears.
5 <<OVER TEMPERATURE!! (hull
unit, transceiver unit)>> Remains on-screen until the cause is removed or
rectified.
Message Meaning, Remedy