manualshive.com logo in svg

Fukuda 8000 Series, Руководство по обслуживанию

Поделиться
Скачать
Fukuda 8000 Series Скачать руководство пользователя страница 157

5-31

Chapter 5  Initial Settings

User Mode Registration

[Change]: User mode settings can be changed.
The user mode setting window background will be displayed in pink.

[Initialize]: The settings for the selected key will be initialized.

      NOTE

When a user mode is registered, changed, or initialized, the monitoring mode will 
change to the selected user mode. The alarm settings of the selected alarm system 
will be applied.

3

The item to set the same settings for all modes can be selected.

1

Press the [Set All Modes] key.

The screen to select the setting item will be displayed.

2

Press the key for the setting item.

The confirmation window to apply the current setting to all modes will be displayed.

3

Press [OK] to apply the current setting to all modes.

4

All user modes will be initialized.

5

To change the name of user mode, press the [Change Mode Name] key and then select the key for the user 
mode to change the name.

Содержание 8000 Series







































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды