Fujitsu SV600, Основное руководство по эксплуатации, Страница: 314 / 500

Scanning Documents by Inserting Two Documents at a Time or
by Inserting the Next Document While the Current Document Is
Being Scanned (S1100i)
When scanning small size documents such as business cards and postcards with the ScanSnap,
you can insert two documents at a time or you can insert the next document while the current
document is being scanned. These scanning methods are referred to as dual scans.
Documents can be inserted in the following two methods:
l Inserting two documents at a time in the ScanSnap
l Inserting the next document while the current document is being scanned
For details about documents that can be scanned, refer to "Documents to Scan (S1100i)" (page
305) .
ATTENTION
l When you select an option other than [Automatic detection] for [Paper size] in the [Paper] tab of the
"ScanSnap Setup Window" (page 88) , the dual scan function is disabled.
l Use a dual scan to scan a document within the following ranges. If one of the following ranges is
exceeded, a length error occurs and part of the document may not appear in the scanned image.
-
Maximum scanning length: 863 mm (34 in.) (355.6 mm (14 in.) when [Excellent] is specified for
[Image Quality] in the [Scanning] tab of the
"ScanSnap Setup Window" (page 88) )
- Maximum number of documents for scanning: 20 sheets
l When you continue scanning by inserting the next document while the current document is being
scanned, the [Scan/Stop] button flashes more quickly if the scanning length exceeds 650 mm (26
in.). If this occurs, wait until scanning is complete without continuing to insert more documents.
After scanning is complete, insert the next document. The next scan is started automatically.
Scanning Documents with S1100i
314