Fujitsu ScanSnap S500, Руководство оператора

Страница: 13 / 201

ScanSnap S500 Operator's Guide
xi
About the Hot Surface Hazard Warning Label
The following warning labels are attached to this product.
Screen Examples In This Manual
The screen examples in this manual are subject to change without notice in the interest of
product improvement.
If actual screens differ from those used as examples in this manual, operate by following the
actual ones referring to the User's Manual of the scanner.
The screenshots used in this manual are for the ScanSnap Manager and the CardMinder
applications.
The screen examples in this manual are created according to Microsoft Corporation’s
Guideline.
About Maintenance
Repairs should be done by properly trained repair technicians.
When this product needs servicing, please contact the store where you purchased it or any
authorized FUJITSU Image Scanner service provider.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not perform.
The drawing inside or under the circle shows the specific action that is not
allowed.
R
Outline characters on a colored background show instructions users should fol-
low.
It may also include the drawing that shows the specific instruction.
The area around the part to which this warning label is affixed can become very hot.
Please take serious caution as the heat can cause burns.
ATTENTION
Do NOT remove the warning labels from the scanner. Avoid them from being
stained, so that the warning labels are plainly visible.