Fujitsu PRIMERGY RX600 S3, Руководство пользователя

Страница: 53 / 305

53
PRIMERGY RX600 S3 User’s Guide
2
Checkin
g before OS Inst
a
llatio
n
„
ServerStart CD-ROM
ServerStart supplied with the server is two-CD set (Disc 1 and Disc 2).
Disc 1 is used to create the configuration file and install the OS.
Disc 2 is used when you are requested to insert it during installation.
„
Switching the Mode
When opening the configuration file and inputting information in the installation fields in the wizard, do
not switch any other mode by manipulating the tree or by any other means (e.g. do not start up the
Windows 2000 Server guided mode during Windows Server 2003 guided mode operation).
Before switching the mode while inputting information, you must save the configuration file. If you do
not save the configuration file, clicking [Cancel] will delete any changes that have been made.
„
Installing Windows 2000 Server
To install Windows 2000 Server, you have to use Service Pack 4 integrated OS media.
„
Exiting ServerStart
After operation in guided or expert mode, exiting ServerStart restarts the system. Remove disks from the
floppy disk and CD-ROM drives and click [OK]. When the display on the screen disappears, turn off the
system.
„
License for Use of System for ServerStart
"License for Use of System for ServerStart" linked from the ServerStart startup window is a license for
use of Windows PE contained in the ServerStart CD-ROM. Windows PE for starting up ServerStart can
be only used for installing Windows Server 2003 or Windows 2000 Server provided under a separate
legal license.
„
Setting Up the Printer
ServerStart does not support setup of printers. Perform installation after setup is completed.