Fujitsu PRIMERGY RX600 S3, Руководство пользователя

Страница: 266 / 305

266
Chapter 9 Operation and Maintenance
0146 Insufficient Memory to Shadow PCI
ROM PCI ROM error. Check that the PCI card is mounted
properly. If the message still appears, the PCI card or the
PCI slot must be replaced. If the message still appears
after the replacement, the baseboard must be replaced.
Contact an office listed in the "Contact Information" of
"Start Guide".
8110-8113 Processor n Internal error (IERR) CPU error ("n" in the message represents the CPU socket
number). Set [Processor Retest] on the [Processor] menu
to [Enabled] in the BIOS Setup Utility, reboot the system,
and confirm the CPU connection. If the message still
appears, the CPU must be replaced. If the message still
appears after the replacement, the baseboard must be
replaced. Contact an office listed in the "Contact
Information" of "Start Guide".
8120-8123 Processor n Thermal Trip Error CPU error ("n" in the message represents the CPU socket
number). After confirming that the heat sink, the fan, and
the airflow work normally, set [Processor Retest] on the
[Processor] menu to [Enabled] in the BIOS Setup Utility,
and reboot the system. If the message still appears, the
CPU must be replaced.
8130-8133 Processor n Disabled CPU error ("n" in the message represents the CPU socket
number). After confirming whether there are any errors
reported in the system event log, set [Processor Retest] on
the [Processor] menu to [Enabled] in the BIOS Setup
Utility, and reboot the system. If the message still
appears, replace the CPU. If the message still appears
after the replacement, the baseboard must be replaced.
Contact an office listed in the "Contact Information" of
"Start Guide".
8140-8143 Processor n Failed FRB-3 timer CPU error ("n" in the message represents the CPU socket
number). Start the BIOS Setup Utility, set [Processor
Retest] on the [Processor] menu to [Enabled], and reboot
the system. If the message still appears, replace the CPU.
If the message still appears after the replacement, the
baseboard must be replaced. Contact an office listed in
the "Contact Information" of "Start Guide".
8160-8163 Processor n unable to apply microcode
update CPU error ("n" in the message represents the CPU socket
number). Start the BIOS Setup Utility, set [Processor
Retest] on the [Processor] menu to [Enabled], and reboot
the system. If the message still appears, replace the CPU.
If the message still appears after the replacement, the
baseboard must be replaced. Contact an office listed in
the "Contact Information" of "Start Guide".
8170-8173 Processor n failed BIST
8180-8183 BIOS does not support the current
stepping for processor n
8190 Watchdog Timer Failed on Last Boot Boot Watchdog Timer has timed out. View the system
event log and confirm whether any errors have been
recorded.
8198 Operating system boot watchdog timer
failure
table: List of POST Errors
Error
Code
Message Description