Fujitsu PRIMERGY RX600 S3, Руководство пользователя

Страница: 199 / 305

199
PRIMERGY RX600 S3 User's Guide
1
2
3
4
5
6
7
9
8
Inst
alling Internal
Options
1
Install memory modules according to the installation conditions.
2
Start the BIOS Setup Utility.
3
Select the [Memory] menu, [Configure System RAS and Performance], and
then press the [Enter] key.
4
Select [Desired Memory Configuration], and press the [Enter] key. Select
[RAID], and press the [Enter] key.
5
Select [View Configuration Detail] and press the [Enter] key.
The View Configuration Detail submenu window appears.
6
Check that [Configuration Possible] and [Hot Replace] are set to [Yes].
If [No] is displayed, the memory modules were not installed correctly. Install them correctly
according to the installation conditions.
` If [Hot Replace] is set to [No], the memory modules cannot be replaced while the server
is running.
7
Press the [F10] key.
A confirmation message appears, asking whether you want to save the changed BIOS settings.
8
Select [Yes] and press the [Enter] key.
The memory RAID function is enabled after the system is restarted.
„
Spare Memory Function
Assign spare memory modules by memory board. The available capacity (logical capacity) of the
memory is the half of that of the physical memory.
z
Installation Conditions
Install the memory according to the following conditions.
 : Memory installed
-: Memory not installed
table: Conditions for the Spare Memory Function
Memory Board A Memory Board B Memory Board C Memory Board D
Bank 1 Bank 2 Bank 1 Bank 2 Bank 1 Bank 2 Bank 1 Bank 2
1A 1B 2A 2B 1A 1B 2A 2B 1A 1B 2A 2B 1A 1B 2A 2B

   - - - - - - - - - - - -
        - - - - - - - -
            - - - -
               