Fujitsu PRIMERGY BX620 S4 Скачать руководство пользователя страница 229

Страница: 229 / 276

229

PRIMERGY BX620 S4 Server Blade User’s Guide

9.2 Troubleshooting

This section explains the corrective actions to be taken when the server is not

running properly or when error messages are displayed.

Depending on the situation, refer to the following.

• Hardware problems:

"9.2.1 Hardware Troubleshooting" (pg.229)

• Error messages:

"9.2.2 Error Messages" (pg.234)

• Software problems:

"9.2.3 Software Troubleshooting" (pg.238)

If the problem is not resolved after performing the following troubleshooting, contact an office listed in

the "Contact Information" of the "Start Guide".

When contacting an office listed in the "Contact Information" of the "Start Guide", "9.8.2 Contacting

Maintenance Support" (

pg.259) and collect the required information.

PRIMERGY information

For the latest information on PRIMERGY, update modules, drivers and the software, refer to the Fujitsu

PRIMERGY website.

http://www.fujitsu.com/global/services/computing/server/ia/driver/

Regarding BIOS and firmware, contact to Fujitsu Support Office. Refer to the following website.

http://www.fujitsu.com/global/contact/computing/PRMRGY_index.html

9.2.1 Hardware Troubleshooting

This section explains hardware related troubleshooting. If it does not operate properly or if a failure is

suspected, check the following.

For optional devices, refer to the optional device manuals.

Chassis

The main power of the Chassis will not turn on, or the power LED on the front
of the Chassis does not light up

• Check to see whether the power cable of the Chassis is properly connected to the outlet.

For instructions on connecting the power cable, refer to the "Start Guide".

• The main power of the Chassis may have been turned on within 2 minutes of the power cable being

connected. Turn the power on after 2 minutes has lapsed.

Содержание PRIMERGY BX620 S4





















































































































































































































































































Результаты поиска

Содержание PRIMERGY BX620 S4

Отзывы:

Похожие инструкции для PRIMERGY BX620 S4

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Результаты поиска

Содержание PRIMERGY BX620 S4

Отзывы:

Похожие инструкции для PRIMERGY BX620 S4

Бренды по названию

Популярные бренды