Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 28 / 276

28
Chapter 1 Overview
• Hard disk status LED (Right)
This LED lights or blinks depending on the hard disk status described below.
d Server blade power LED ( )
It is lit or blinks depending on the Server Blade power status as follows.
e Server blade power switch
Press this switch to turn the Server Blade on.
For the procedure to turn the Server Blade on/off, refer to the "BX600 S3 Blade Server System
Unit Hardware Guide".
When the hard disk access display LED lights, do not turn off the power. Data in the hard disk
may be damaged.
f KVM select LED ( )
It is lit or blinks depending on the KVM status as follows.
table: Hard disk status LED
LED status Description
Off Normal mode
Lights amber Error detected in the hard disk
Flashes amber Displaying the running hard disk using SAS BIOS Utility
Flickers amber Rebuilding
table: Server blade power LED
LED status Description
Off The power is not supplied to the Server Blades.
(The Chassis power is not turned on.)
Lights green The power is turned on.
Lights amber The power is turned off. (Standby)
Blinks green Blinks when an error is detected in the Server Blade or the Server Blade
identification function is used while the power is turned on.
If an error occurs, contact an office listed in the "Contact Information" of
"Start Guide" or device administrator.
Blinks amber Blinks when an error is detected in the Server Blade or the Server Blade
identification function is used while the power is turned off.
If an error occurs, contact an office listed in the "Contact Information" of
"Start Guide" or device administrator.
Blinks green-amber Standby mode. (ACPI function)
The Server Blade does not support this mode.
table: KVM select LED
LED status Description
Off KVM is not selected.
Lights green KVM is selected.
Blinks amber
Blinks when a BMC
*1
error was detected without KVM selected, or when
the maximum installable number for the Server Blades was exceeded.
In this case, contact an office listed in the "Contact Information" of "Start
Guide" or device administrator.