Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 45 / 276

45
PRIMERGY BX620 S4 Server Blade User’s Guide
Caution when installing the LAN expansion board (PG-LND201)
When installing an OS using ServerStart in a device which contains a LAN expansion board (PG-
LND201), the Connection Name and IP address settings that are set in the network protocol screen of the
OS installation wizard will not be set.
Allocate the Connection Name and IP address in the LAN expansion board (PG-LND201) manually
after the OS installation.
2.3.5 Onboard Controller and Expansion Cards Supported
by ServerStart
ServerStart supports automatic driver installation for the following expansion cards.
2.3.6 Cautions for Manual Installation
Checking onboard array controller setting
Disk array configuration on the onboard array controller must be completed before the OS is installed.
For more details, refer to the manual in the Array Controller Document & Tool CD.
Free space required for installation
The partition where the OS is installed must have enough free space for obtaining memory dump. For
more details, refer to "5.1 Memory Dump/Paging File Setting" ( pg.100).
Cautions on restarting
In the course of installation, a message appears to indicate that the setup program restarts. Wait until it
restarts.
For more details on background operations, refer to the manual in the Array Controller Document &
Tool CD.
table: Automatic Expansion Card Driver Installation
Name Model Bus
Onboard SAS (array) controller - PCI-E
Onboard LAN - PCI-E
Onboard VGA - PCI
SAS RAID Ctrl PG-248EL
PCI-E
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp PG-2861L PCI-E
SCSI Ctrl U160 lp PG-1301L PCI-X
1Gbit/s Ethernet I/O Module
PG-LND201 PCI-E
2Gbit/s FC I/O Module
PG-FCD102 PCI-X
4Gbit/s FC I/O Module PG-FCD201 PCI-E