Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 182 / 276

182
Chapter 7 Installing Internal Options
7.4 Installing Memory Modules
Additional memory will help to increase the amount of data to read at a time and
improve the server processing capability.
• When installing or removing the memory modules, make sure to remove the
Server Blade from the Chassis. Failure to do so may cause electric shock.
For details on how to remove the Server Blade from the Chassis, refer to
"BX600 S3 Blade Server System Unit Hardware Guide".
• Do not install unauthorized third party memory modules. Doing so may cause
electric shock, a fire, or failures.
• Wait for a sufficient period of time after server shutdown before installing or
removing memory. Failure to do so may cause burns.
• When installing or removing memory modules, make sure to remove the
screws on the specified points only. There is chance of injury if screws other
than those on the specified points are removed.
It may also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so may cause injury. It may also damage the server.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity. Before handling them, first touch a metal
part of the Chassis to discharge static electricity.
• Do not insert and remove memory modules repeatedly. Doing so may cause
failures.
• Hold the edge of the memory module as shown below. Do not touch the part
with gold wire (terminal) or memory chip.
Memory chip
Memory module
Do not touch this part.