Fujitsu MB2147-01, Примечание к применению

Страница: 28 / 121

6
CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS
1.4 RS-232C Port Specifications
The emulator can be connected to one RS-232C cable.
■
RS-232C Port Specifications
Table 1.4-1 "RS-232C Port Specifications" lists the RS-232C port specifications. Figure 1.4-1
"RS-232C Connector Circuit Configuration" shows the connector circuit configuration.
For information on Interlink cable connection, see Section 1.10 "Options".
Figure 1.4-1 RS-232C Connector Circuit Configuration
Table 1.4-1 RS-232C Port Specifications
Item Description
Connector type D-Sub 9-pin male
Signal definition DTE (same as for a personal computer)
Baud rate* 9600, 19.2 K, 115.2 K [bps]
Data bit length 8 bits
Stop bit length 1 bit
Parity bit None
X control None
*
:
The possible values depend on the emulator debugger specifications. For more
information, see the Softune Workbench Operation Manual .
To internal circuits of emulator
The emulator uses pin assignments that do not use some signal
lines, as shown above. Note: