Fujitsu MB2147-01, Примечание к применению, Страница: 103 / 121

Debugging, First Steps
FR Family MB2198-01 Emulating and Debugging Installation Guide, Doc. No. 002-05223 Rev. *A 11
3.3 Start Execution
To enter the run mode, click on ,select Debug

Run

Go
, or press “F5”.
Now the program is being executed. If you are using a target system with LEDs on Port1, you will see the LEDs
flicker.
3.4 Stop Execution
To stop the MCU, click on or select Debug

Abort .
Now the system is halted, but it can be continued again by clicking on “
Run continuously
” or selecting “
Go
”.
3.5 Reset MCU
To reset the MCU, clock on or select Debug

Reset of MCU .
Continuation from previous page
000C01D6: 8B0D MOV R0,R13
000C01D8: 1A01 DMOVB R13,@001
24: DDR1=0xFF;
000C01DA: CFF0 LDI:8 #FF,R0
000C01DC: 9B0C0401 LDI:20 #00401,R12
000C01E0: 16C0 STB R0,@R12
25:
26: while (1)
27: {
28:
wait(20000);
000C01E2: 9B044E20 LDI:20 #04E20,R4
000C01E6: D7DB CALL \wait
29:
30: PDR1++;
000C01E8: 0A01 DMOVB @001,R13
000C01EA: 8BD0 MOV R13,R0
000C01EC: A410 ADD #1,R0
000C01EE: 8B0D MOV R0,R13
000C01F0: 1A01 DMOVB R13,@001
000C01F2: E0F7 BRA 000C01E2
31: }
32: }
000C01F4: 9F90 LEAVE
000C01F6: 0781 LD @R15+,RP
000C01F8: 9720 RET
Run continuously
Stop execution
Reset MCU