93
SECTION 2
Expansion RAM module slot cover
Notch in the memory
4
Remove the memory.
Remove the hook on each side from the memory module. The memory comes up slightly. Then,
pull the memory diagonally up to detach it from the slot.
5
Install a new memory module.
Insert the memory diagonally into the slot with the notch in the memory aligned with the projection
on the connector, and then turn the memory down until it clicks into place.
6
Attach the expansion RAM module slot cover.
Attach the cover removed in step 3.
Critical Points
After you have changed memory, check the memory capacity of you computer to be sure
that the memory is installed properly.
Hook (Slot 2 (upper slot))
Hook (Slot 1 (lower slot))
Clove Sec 2 (088-93)
17/10/02, 4:41 PM
93
