51
SECTION 1
Problem
Cannot connect to
the network
I want to remove the
driver.
(Windows 2000)
Possible Cause
There are several
possible causes,
as listed to the right.
Refer to the specific
section of this manual or
your user’s manual.
Possible Solution
The following causes are possible. Check
each one of them.
• The network name or encryption key is not right.
• The driver has not correctly started.
• The destination computer is not turned on.
• You do not have the access privilege to
the destination computer.
• The card has failed.
• Hardware conflict.
Windows 2000:
When removing the driver, make sure
that the device is attached to the
computer. If you try to remove the driver
while the device is detached from the
computer, the driver is not removed.
1. Right click the [My Computer] icon on
the desktop, and then click
[Properties] from the menu that
appears. [System Properties] appears.
2. Click the [Hardware] tab.
3. Click [Device Manager...]. The [Device
Manager] window appears.
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless
LAN PCI Card], and click [Uninstall]
from the menu that is displayed.
[Confirm Device Removal] appears.
6. Click [OK].
7. Close [System Properties].
8. Make sure that the icon has
disappeared from the task tray in the
lower right corner of the screen.
9. Click [Start]
→
[Settings]
→
[Control Panel].
10. Double-click [Add/Remove Programs].
[Add/Remove Programs] appears.
11. Perform the following steps.
• Click [PRISM 11Mbps Wireless
LAN for Windows].
• Click [Change/Remove].
A window appears asking you if you
really want to remove the driver.
12. Click [Yes].
When the driver is removed, a window appears
showing that the driver has been removed.
13. Click [OK].
14. Close [Add/Remove Programs] and
[Control Panel].
15. Shut down Windows, and turn off the
computer.
Clove Sec 1 (042-56)
17/10/02, 4:36 PM
51
